Engine
Maximum Gross Power
Engine Model
Maximum Gross Power - ISO 14396
Maximum Gross Power - ISO 14396 (metric)
Rated Net Power - 2,400 rpm - SAE J1349
Rated Net Power - 2,400 rpm - ISO 9249
Maximum Gross Torque - ISO 14396
Maximum Net Torque - ISO 9249
Bore
Displacement
Stroke
Note (1)
Net power ratings are tested at the reference conditions for the specified standard.
Note (2)
Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner, diesel exhaust filter, and fan at minimum speed.
Note (3)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note (4)
Flywheel per the SAE reference conditions with the fan at maximum speed.
Note (5)
The Cat C3.3B DIT Tier 4 Final/Stage V uses an active regeneration system which requires no operator interaction under normal conditions.
Note (6)
Stage V engine available for Europe only.
Emissions
*The Cat C3.3B DIT engine meets EU Stage V/U.S. EPA Tier 4 Final emission standards.
Weights
Operating Weight
Note
Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort ROPS cab, standard flow hydraulics and skid-steer coupler. The 908M is configured with a 1.1 m³ (1.44 yd³) bucket with bolt-on cutting edge.
Service Refill Capacities
Cooling System
Fuel Tank
Engine Oil
Hydraulic Tank
Hydraulic System - Including Tank
Transmission - Gear Box
Loader Hydraulic System
Maximum Flow - Implement Pump
Maximum Flow - Implement Pump - Auxiliary Function Standard Flow
Maximum Flow - Implement Pump - Auxiliary Function High Flow
Maximum Working Pressure - Implement Pump
Relief Pressure - Tilt Cylinder Head
Relief Pressure - Tilt Cylinder Rod
3rd Function Maximum Working Pressure
Boost Flow Maximum Pressure
Lift Cylinder, Double Acting - Bore Diameter
Lift Cylinder, Double Acting - Rod Diameter
Lift Cylinder, Double Acting - Stroke
Tilt Cylinder, Double Acting - Bore Diameter
Tilt Cylinder, Double Acting - Rod Diameter
Tilt Cylinder, Double Acting - Stroke
Hydraulic Cycle Time - 1,800 rpm - Raise, Ground Level to Maximum Lift
Hydraulic Cycle Time - 1,800 rpm - Dump, at Maximum Lift Height
Hydraulic Cycle Time - 1,800 rpm - Float Down, Maximum Lift to Ground Level
Hydraulic Cycle Time - 1,800 rpm - Total Cycle Time
Hydraulic Cycle Time - 1,000 rpm - Raise, Ground Level to Maximum Lift
Hydraulic Cycle Time - 1,000 rpm - Dump, at Maximum Lift Height
Hydraulic Cycle Time - 1,000 rpm - Float Down, Maximum Lift to Ground Level
Operating Specifications
Tipping Load - Straight - ISO 14397-1
Tipping Load - Full Turn - ISO 14397-1
Full Turn Tipping Load
Clearance - Full Lift and 45° Dump
Reach - Full Lift and 45° Dump
Steering Articulation Angle - Each Direction
Rated Bucket Capacity
Dimensions with Bucket (Approximate) - Standard Lift - With ISO Coupler
Height - Ground to Cab**
Height - Ground Clearance**
Length - Wheel Base
Length - Overall*
Reach - Bucket at 45°*
Dig Depth**
Clearance - Bucket at 45° *
Clearance - Level Bucket**
Height - Bucket Pin**
Departure Angle
Turning Radius - Over Bucket
Turning Radius - Inside of Tires
Width - Bucket
Width - Tread Center
Machine Width
Articulation Angle
Dump Angle at Full Lift
Operating Weight
Note (1)
Note (2)
Note (3)
Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
Dimensions with Bucket (Approximate) - Standard Lift - With SSL Coupler
Height - Ground to Cab**
Height - Ground Clearance**
Length - Wheel Base
Length - Overall*
Reach - Bucket at 45°*
Dig Depth**
Clearance - Bucket at 45° *
Clearance - Level Bucket**
Height - Bucket Pin**
Departure Angle
Turning Radius - Over Bucket
Turning Radius - Inside of Tires
Width - Bucket
Width - Tread Center
Machine Width
Articulation Angle
Dump Angle at Full Lift
Operating Weight
Note (1)
Note (2)
Note (3)
Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
Steering
Steering Articulation Angle - Each Direction
Steering Cylinder, Double Acting - Bore Diameter
Steering Cylinder, Double Acting - Rod Diameter
Steering Cylinder, Double Acting - Stroke
Nominal Flow - Steering Pump
Maximum Working Pressure - Steering Pump
Maximum Steering Torque - 0° (Straight Machine)
Maximum Steering Torque - 39° (Full Turn)
Steering AC Cycle Times - Full Left to Full Right - 2,620 rpm
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
Cab
ROPS
FOPS
FOPS: ISO 3449:2005 Level II
Note (1)
Cat cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
The declared dynamic operator Sound Pressure level per ISO 6396:2008*, when the cab is properly installed and maintained, is 75 dB(A). The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 101 dB(A). Optional Low Sound or Blue Angel selection will reduce this to 99 dB(A).
Note (3)
*The measurements were conducted with the cab doors and windows closed.
Drive Train
Forward - Range 1
Forward - Range 2
Forward - High Range
Reverse - High Range
Reverse - Range 1
Reverse - Range 2
Tires
Note (2)
Other tire choices available, contact your Cat dealer for details.
Note (3)
In certain applications, the loader's productive capabilities may exceed the tires' tonnes-km/h (ton-mph) capabilities.
Note (4)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Option (1)
Option (2)
Option (3)
Option (4)
400/70 R20 Bibload Michelin
Option (5)
Option (6)
Buckets
Bucket Capacities
0.75-1.5 m3 (1.0-2.0 yd3)
Bucket Capacities - ISO Coupler
Bucket Capacities - SSL Style Coupler
General Purpose
0.8 m³ (1 yd³), 0.9 m³ (1.2 yd³), 1.0 m³ (1.3 yd³), 1.1 m³ (1.4 yd³), 1.3 m³ (1.7 yd³)
Light Material
1.2 m³ (1.6 yd³), 1.5 m³ (2.0 yd³)
Multi-Purpose
0.75 m³ (1.0 yd³), 0.9 m³ (1.2 yd³), 1.05 m³ (1.37 yd³)
Grapple
Note
All capacities are applicable for each model. Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.