Engine
Gross Power - SAE J1995
Operating Specifications
Rated Operating Capacities - 35% Tipping Load
Weights
Operating Weight
Dimensions
Length - Track on Ground
Overall Length - Track
Height - Top of Cab
Ground Clearance
Departure Angle
Maximum Dump Angle
Bucket Pin Height - Carry Position
Vehicle Width (400 mm/15.7 in tracks)
Turning Radius from Center - Coupler
Bucket Pin Reach - Maximum Lift
Vehicle Width (320 mm/12.6 in tracks)
Maximum Reach - With Arms Parallel to Ground
Maximum Overall Height
Turning Radius from Center - Bucket
Bucket Pin Height - Maximum Lift
Length - Without Bucket
Rack Back Angle - Maximum Height
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Turning Radius from Center - Machine Rear
Length - With Bucket on Ground
Clearance at Maximum Lift and Dump
Reach - Maximum Lift/Dump
Hydraulic System
Hydraulic Flow - High Flow - Loader Hydraulic Pressure
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
Hydraulic Flow - Standard - Loader Hydraulic Pressure
Hydraulic Flow - Standard - Loader Hydraulic Flow
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
Hydraulic Flow - High Flow - Loader Hydraulic Flow
Cab
ROPS
FOPS
Power Train
Travel Speed - Forward or Reverse - One Speed
Travel Speed - Forward or Reverse - Two Speed
Service Refill Capacities
Hydraulic System
Fuel Tank
Engine Crankcase
Hydraulic Tank
Cooling System
Air Conditioning System (if equipped)
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Engine
Displacement
Net Power
Bore
Engine Model
Gross Power
Net Power - SAE 1349
Stroke
Operating Specifications
Tipping Load
Breakout Force - Tilt Cylinder
Ground Contact Area - With 320 mm/12.6 in Track
Ground Pressure - With 320 mm/12.6 in Track
Rated Operating Capacities - 50% Tipping Load
Ground Contact Area - With 400 mm/15.7 in Track
Noise Level
Note (3)
***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Engine
Peak Torque - 1,500 rpm - SAE J1995
Noise Level
Outside Cab***
Engine
Net Power - ISO 9249
Noise Level
Inside Cab**
Operating Specifications
Rated Operating Capacity with Optional Counterweight
Ground Pressure - With 400 mm/15.7 in Track
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Noise Level
Note (2)
**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Weights
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).