Engine
Gross Power - SAE J1995
Operating Specifications
Rated Operating Capacity
Weights
Operating Weight
Dimensions
Wheel Base
Height - Top of Cab
Vehicle Width over Tires
Ground Clearance
Departure Angle
Maximum Dump Angle
Turning Radius from Center - Coupler
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Bucket Pin Reach - Maximum Lift
Length - Without Bucket
Bucket Pin Height - Maximum Lift
Turning Radius from Center - Machine Rear
Maximum Overall Height
Bucket Pin Height - Carry Position
Length - With Bucket on Ground
Turning Radius from Center - Bucket
Reach - Maximum Lift/Dump
Maximum Reach - With Arms Parallel to Ground
Rack Back Angle - Maximum Height
Clearance at Maximum Lift and Dump
Bumper Overhang - Behind Rear Axle
Hydraulic System
Hydraulic Flow - Standard - Loader Hydraulic Flow
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow
Hydraulic Flow - Standard - Loader Hydraulic Pressure
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure
Cab
ROPS
FOPS
Power Train
Travel Speed - Forward or Reverse - Two Speed Option
Travel Speed - Forward or Reverse - One Speed
Service Refill Capacities
Chain Box - Each Side
Cooling System
Engine Crankcase
Fuel Tank
Hydraulic System
Hydraulic Tank
Engine
Net Power - SAE 1349
Displacement
Stroke
Bore
Net Flywheel Power
Peak Torque - 1,500 rpm - SAE J1995
Net Power - ISO 9249
Engine Model
Weights
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Operating Specifications
Tipping Load
Breakout Force - Tilt Cylinder
Rated Operating Capacity with Optional Counterweight
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Noise Level
Inside Cab**
Outside Cab***
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (3)
***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Air Conditioning System (if equipped)
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.