Engine
Engine Model
Engine Power - Tier 3 Engine - ISO 14396:2002
Engine Power - VR Engine - ISO 14396:2002
Bore
Stroke
Displacement
Note (1)
Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
Note (2)
All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications in 40 CFR Part 1065 and EU specifications in Directive 97/68/EC with a density of 0.845-0.850 kg/L @ 15° C (7.05-7.09 lb/gal @ 59° F) and fuel inlet temperature 40° C (104° F).
Note (3)
Engine derate will commence at an altitude of 2743 m (8,999 ft).
Note (4)
Optional Ventilation Reduction package available.
Optional engine with emissions equivalent to Tier 3 and EU Stage IIIA is also available.
Note (5)
Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available.
Operating Specifications
Nominal Payload Capacity
Gross Machine Mass
Weights
Empty
Empty - Front Axle
Empty - Rear Axle
Loaded
Loaded - Front Axle
Loaded - Rear Axle
Weight Distribution
Empty - Front Axle
Empty - Rear Axle
Loaded - Front Axle
Loaded - Rear Axle
Transmission
Forward - 1
Forward - 2
Forward - 3
Forward - 4
Reverse - 1
Note
Maximum travel speeds with standard 26.5 × R25 tires.
Final Drives
Differential Ratio
Final Drive Ratio
Total Reduction Ratio
Note
Body Hoist
Raise
Lower
Total Cycle Time
Body Capacities
Body 1
Body 2 - Standard Body
Body 3
Wide Body
Ejector Body (1)
Ejector Body (2)
Note
Turning Dimensions
Outside Clearance Radius
Inner Clearance Radius
Articulation Angle
Frame Oscillation
Service Refill Capacities
Engine Crankcase - With Filter
Transmission
Hydraulic Tank
Cooling System
Front Differential and Final Drives
Rear Differential and Final Drives
Fuel Tank
Tires
Tire Size
Standards
Standards
Operating Specifications
Body Capacities
11.3-17.5 m³ (14.8-22.9 yd³)