Engine
Engine Model
Rated Speed
Engine Power - ISO 14396:2002
Gross Power - SAE J1995:2014
Net Power - SAE J1349 - Standard Ambient
Net Power - SAE J1349 - High Ambient
Bore
Stroke
Displacement
Peak Torque - 1,200 rpm
Torque Rise
Emissions
U.S. EPA TIer 4 Final and EU Stage V emission standards or U.S. EPA Tier 2 and EU Stage II equivalent
Transmission
Transmission Type
Cat planetary power shift
Forward - 1
Forward - 2
Forward - 3
Reverse - 1
Reverse - 2
Reverse - 3
Direct Drive - Forward 1
Direct Drive - Forward 2
Direct Drive - Forward 3
Direct Drive - Reverse 1
Direct Drive - Reverse 2
Direct Drive - Reverse 3
Note
Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
Operating Specifications
Operating Weight
Rated Payload - Standard
Rated Payload - High Lift
Bucket Capacity Range
8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)
Cat Truck Match - Standard
Cat Truck Match - High Lift
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Lift/Tilt System
Variable displacement piston
Maximum Flow at 1,800 rpm (1)
Cylinders, Double Acting - Lift, Bore and Stroke
235 mm × 1287 mm (9.3 in × 50.7 in)
Cylinders, Double Acting - Tilt, Bore and Stroke
292.1 mm × 820 mm (11.5 in × 32.3 in)
Pilot System
Open loop and pressure reducing
Relief Valve Setting - Main
Relief Valve Setting - Lift/Tilt
Hydraulic Cycle Times
Rack Back
Raise
Dump
Lower
Lower Float Down
Total Hydraulic Cycle Time - Empty Bucket
Hydraulic System - Steering
Steering System - Circuit
Steering System - Pump
Piston, variable displacement
Maximum Flow at 1,400 rpm
Relief Valve Setting - Steering
Total Steering Angle
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.7 kg of refrigerant which has a CO2 equivalent of 3.861 metric tonnes (4.256 tons).
Axles
Front
Rear
Oscillation Angle
Brakes
Brakes
Service Refill Capacities
Fuel Tank
Cooling System
Engine Crankcase
Transmission
Differential - Final Drives - Front
Differential - Final Drives - Rear
Hydraulic System Factory Fill
Hydraulic Tank - Implement and Hydraulic Fan
Hydraulic Tank - Steering and Braking
Note
All nonroad U.S. EPA Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214. Cat DEO‑ULS™ or oils that meet the Cat ECF-3, API CJ‑4, and ACEA E9 specification are required. For further fluid specifications and guidelines, visit: http://parts.cat.com/cda/files/3244668/7/SEBU6250-19.pdf.
Sound Performance - Standard
Operator Sound Level (ISO 6396:2008)
Machine Sound Level (ISO 6395:2008)
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008)
Machine Sound Level (ISO 6395:2008)
Buckets
Bucket Capacities
8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)
Standard Equipment
NOTE
OPERATOR ENVIRONMENT
POWER TRAIN
ELECTRICAL
OTHER
Optional Equipment
NOTE
POWER TRAIN
OPERATOR ENVIRONMENT
MISCELLANEOUS ATTACHMENTS