Engine
Engine Power @ 1,600 rpm - ISO 14396:2002
Gross Power @ 1,600 rpm - SAE J1995:2014
Engine Model
Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011
Note (1)
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards.
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011
Weights
Operating Weight
Note
Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound suppression, and a 5.4 m³ (7.1 yd³) general purpose bucket with BOCE.
Transmission
Forward - 1
Forward - 2
Forward - 3
Forward - 4
Note
Maximum travel speed in standard vehicle with empty bucket and
standard L3 tires with 849 mm (33 in) roll radius.
Reverse - 1
Reverse - 2
Reverse - 3
Reverse - 4
Sound
Note (1)
** For machines in European Union countries and in countries that adopt the EU Directives.
Note (2)
***European Union Directive 2000/14/EC as amended by 2005/88/EC.
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated
greenhouse gas refrigerant R134a (Global Warming Potential = 1430).
The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2
equivalent 2.288 metric tonnes (2.522 tons).
Operating Specifications
Breakout Force
Note (1)
For a machine configuration as defined under Weight.
Note (2)
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Static Tipping Load - Full 40° Turn - No Tire Deflection
Static Tipping Load - Full 40° Turn - With Tire Deflection
Service Refill Capacities
Cooling System
Crankcase
DEF Tank
Differential - Final Drives - Front
Differential - Final Drives - Rear
Fuel Tank
Hydraulic Tank
Transmission
Hydraulic System
Implement System - Maximum Operating Pressure
Implement System - Maximum Pump Output at 2,250 rpm
Dimensions
Note
All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.
Dimensions - High Lift
Centerline of Rear Axle to Edge of Counterweight
Centerline of Rear Axle to Hitch
Ground Clearance
Height - Top of Exhaust Pipe
Height - Top of Hood
Height - Top of ROPS
Hinge Pin Height at Carry
Hinge Pin Height at Maximum Lift
Lift Arm Clearance at Maximum Lift
Overall Length - Without Bucket
Tread Width
Wheel Base
Dimensions - Standard Lift
Centerline of Rear Axle to Edge of Counterweight
Centerline of Rear Axle to Hitch
Ground Clearance
Height - Top of Exhaust Pipe
Height - Top of Hood
Height - Top of ROPS
Hinge Pin Height at Carry
Hinge Pin Height at Maximum Lift
Lift Arm Clearance at Maximum Lift
Overall Length - Without Bucket
Tread Width
Wheel Base
Bucket Capacities
Bucket Range
2.8-11.9 m³ 3.75-15.5 yd³
Engine
Engine Torque @ 1,200 rpm – ISO 14396:2002
Gross Torque @ 1,200 rpm – SAE J1995:2014
Dimensions - High Lift
Rack Back - Carry Height
Hydraulic System
Hydraulic Cycle Time - Total
Dimensions - Standard Lift
Rack Back - Carry Height
Width over Tires (Loaded)
Engine
Note (3)
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to- liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel.
Dimensions - High Lift
Rack Back - Maximum Lift
Sound
With Cooling Fan Speed at Maximum Value - Note
Distance of 15 m (49.2 ft), moving forward in second gear ratio.
Dimensions - High Lift
Width over Tires (Loaded)
Engine
Displacement
Dimensions - Standard Lift
Rack Back - Maximum Lift
Rack Back at Ground
Dimensions - High Lift
Rack Back at Ground