Engine
Gross Power - SAE J1995:2014
Net Power - SAE J1349:2011
Net Power - ISO 9249:2007
Engine Power - ISO 14396:2002
Engine Model
Emissions
Option 1 - U.S. EPA Tier 4 Final/EU Stage V/Korea Stage V and Japan 2014
Rated Speed
Peak Torque ( 1,400 rpm )
Torque Rise
Note
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, aftertreatment, and alternator.
Emissions
Option 2 - Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
Rated Speed
Net Power - SAE J1349:2011
Net Power - ISO 9249:2007
Gross Power - SAE J1995:2014
Engine Power - ISO 14396:2002
Peak Torque ( 1,400 rpm )
Torque Rise
Note
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, muffler, and alternator.
Bore
Stroke
Displacement
High Idle Speed
Low Idle Speed
Maximum Altitude - Without Derating
Operating Specifications
Operating Weight (Tier 4 Final/Stage V)
Operating Weight (Tier 3/Stage IIIA equivalent)
Transmission
Transmission Type
Cat Planetary Power Shift
Travel Speeds - Forward - First
Travel Speeds - Forward - Second
Travel Speeds - Reverse - First
Travel Speeds - Reverse - Second
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Pilot operated LS valve with EH
Lift/Tilt System
Variable displacement piston
Maximum Flow at 2,200 rpm
Relief Valve Setting - Lift/Tilt
Cylinders, Double Acting: Lift, Bore, Stroke
120 mm x 915 mm (4.7 in x 36.0)
Pilot System
Open center, fixed displacement gear
Pilot Relief Valve Setting
Hydraulic System - Steering
Steering System - Circuit
Steering System - Pump
Piston – Variable Displacement
Maximum Flow at 2,200 rpm
Relief Valve Setting - Steering
Total Steering Angle
Steering Cycle Times - High Idle
Steering Cycle Times - Low Idle
Service Refill Capacities
Fuel Tank
Diesel Exhaust Fluid Tank
Cooling Systems - Tier 4 Final/EU Stage V
Cooling System - Tier 3/Stage IIIA Equivalent
Engine Crankcase
Transmission
Differential - Final Drives - Front
Differential - Final Drives - Rear
Hydraulic System - Implement/Steering
Hydraulic Tank Only
Note
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester) * • 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, API CK-4, and/or ACEA E9 specifications are required. – Diesel Exhaust Fluid (DEF) that meets all requirements defined in ISO 22241-1:2006.
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 1.4 kg (3.1 lb) of refrigerant which has a CO2 equivalent of 2.002 metric tonnes (2.206 tons).
Axles
Front
Rear
Oscillation Angle
Braking System
Service Brakes
Single Disc Wet (Enclosed) 2 WHL
Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)
Machine Sound Power Level (ISO 6395:2008)
Operator Sound Pressure Level (ISO 6396:2008)*
Machine Sound Power Level (ISO 6395:2008)*
Note (1)
* Sound suppression equipped
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at maximum engine cooling fan speed.
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at maximum engine cooling fan speed.
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)
Machine Sound Power Level (ISO 6395:2008)
Operator Sound Pressure Level (ISO 6396:2008)*
Machine Sound Power Level (ISO 6395:2008)*
Note (1)
* Sound suppression equipped
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at maximum engine cooling fan speed.
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at maximum engine cooling fan speed.
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Straight Blade
Capacity
Overall Width
Height
Height of Cutting Edge
Digging Depth
Ground Clearance
Turning Radius – Outside Corner of Blade
Turning Radius - Inside Corner of Blade
Weight
Total Operating Weight
Wheels
Combination Tips (Weight Group)
Plus Tips - Weight (Group)
Paddle Tips - Weight (Group)
Outside Diameter
Drum Diameter
Drum Width
Tips per Row
Tips per Wheel
Replaceable
Width Over Drums
Tip Height
Dimensions (Approximate)
Height - Top of Beacon
Height to Top of Air Conditioning Condenser
Height - Cab Roof
Height - Top of Exhaust Pipe
Height - Top of Hood
Height to Top of Rear Compactor Guard
Ground Clearance to Hitch
Ground Clearance to Bottom of Bumper
Centerline of Rear Axle to Bumper
Centerline of Rear Axle to Rear Compactor Guard
Hitch to Centerline of Front Axle
Wheel Base
Width over Front Striker Bars
Width over Rear Striker Bars
Width over Platform
Width over Drums
Overall Machine Length with Straight Blade
Ground Clearance to Transmission Guard