Engine
Gross Power (SAE J1995:2014)
Net Power (SAE J1349:2011)
Net Power (ISO 9249:2007)
Engine Power (ISO 14396:2002)
Emissions
Option 1 - U.S. EPA Tier 4 Final/EU Stage V
Engine Model
Rated Speed
Torque Rise
Emissions
Option 2 - Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
Torque Rise
Bore
Stroke
Displacement
High Idle Speed
Low Idle Speed
Maximum Altitude - Without Derating
Transmission
Transmission Type
Cat Planetary Power Shift
Travel Speeds - Forward - First
Travel Speeds - Forward - Second
Travel Speeds - Forward - Third
Travel Speeds - Reverse - First
Travel Speeds - Reverse - Second
Travel Speeds - Reverse - Third
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Pilot operated Load Sensing valve with EH
Lift/Tilt System
Variable displacement piston
Maximum Flow at 2,200 rpm
Relief Valve Setting - Lift/Tilt
Pilot System
Open center, fixed displacement gear
Pilot Relief Valve Setting
Hydraulic System - Steering
Steering System - Circuit
Steering System - Pump
Piston – Variable Displacement
Maximum Flow at 2,200 rpm
Relief Valve Setting - Steering
Total Steering Angle
Steering Cycle Times - High Idle
Steering Cycle Times - Low Idle
Service Refill Capacities
Fuel Tank
Cooling Systems - Tier 4 Final/EU Stage V
Cooling System - Tier 3/Stage IIIA Equivalent
Engine Crankcase
Transmission
Differential - Final Drives - Front
Differential - Final Drives - Rear
Hydraulic Tank Only
Note
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester) * • 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, API CK-4, and/or ACEA E9 specifications are required. – Diesel Exhaust Fluid (DEF) that meets all requirements defined in ISO 22241-1:2006.
Axles
Front
Rear
Oscillation Angle
Dimensions (Approximate)
Hitch to Centerline of Front Axle
Wheel Base
Width over Platform
Height to Top of GPS Antenna
Overall Machine Length with Straight Blade
Overall Machine Length with EU Suppression
Braking System
Service Brakes
Single Disc Wet (Enclosed) 2 WHL
Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.994 tons).
Sound Performance - Tier 4 Final/EU Stage V - Standard
Operator Sound Level (ISO 6396)
Machine Sound Level (ISO 6395)
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
Note (2)
The operator sound pressure level uncertainty is ± 2 dB(A)
Note (3)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (4)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
Sound Performance - Tier 4 Final/EU Stage V - Suppression
Operator Sound Level (ISO 6396)
Machine Sound Level (ISO 6395)
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
Note (2)
The operator sound pressure level uncertainty is ± 2 dB(A)
Note (3)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (4)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
Operator Sound Level (ISO 6396)
Machine Sound Level (ISO 6395)
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
Note (2)
The operator sound pressure level uncertainty is ± 2 dB(A)
Note (3)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (4)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
Dimensions (Approximate)
Height - Top of Beacon
Height - Top of Cab Roof
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
Operator Sound Level (ISO 6396)
Dimensions (Approximate)
Height - Top of Exhaust Pipe
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
Machine Sound Level (ISO 6395)
Dimensions (Approximate)
Height - Top of Hood
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
Dimensions (Approximate)
Height to Top of Radiator Guard
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
Note (2)
The operator sound pressure level uncertainty is ± 2 dB(A)
Note (3)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Dimensions (Approximate)
Ground Clearance to Hitch
Ground Clearance to Transmission Guard
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
Note (4)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
Dimensions (Approximate)
Ground Clearance to Bottom of Bumper
Centerline of Rear Axle to Bumper
Sound Performance - Tier 4 Final/EU Stage V - Suppression EU
Machine Sound Level (ISO 6393)
Note (1)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6393:2008. The measurement was conducted at the rated engine cooling fan speed.
Wheels
Weight
Outside Diameter
Drum Diameter
Drum Width
Tips per Row
Tips per Wheel
Replaceable
Width - Over Drums
Width Between Drums
Tip Height
Blades
Capacity
Overall Width
Height
Digging Depth
Ground Clearance
Maximum Tilt
Turning Radius - Outside Corner of Blade
Turning Radius - Inside Face of Pusharm
Weight
Total Operating Weight
Standard Equipment
NOTE
POWER TRAIN
ELECTRICAL
OPERATOR ENVIRONMENT
TIRES, RIMS AND WHEELS
GUARDS
FLUIDS
OTHER STANDARD EQUIPMENT
STANDARD ATTACHMENTS – HYDRAULICS
STANDARD ATTACHMENTS – OPERATOR ENVIRONMENT
STANDARD ATTACHMENTS – POWER TRAIN
STANDARD ATTACHMENTS – SPECIAL ARRANGEMENTS
STANDARD ATTACHMENTS – ELECTRICAL
STANDARD ATTACHMENTS – FUEL SYSTEMS
STANDARD ATTACHMENTS – TECHNOLOGY PRODUCTS
STANDARD ATTACHMENTS – CLEANER BARS
STANDARD ATTACHMENTS – BLADES
Optional Equipment
NOTE
OPERATOR ENVIRONMENT
TECHNOLOGY PRODUCTS
OTHER ATTACHMENTS
FLUIDS
STARTING AIDS
MISCELLANEOUS