Engine
Engine Model
Gross Power - SAE J1995:2014
Net Power - SAE J1349:2011
Net Power - ISO 14396
Bore
Stroke
Displacement
Note (1)
The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (3)
Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions.
Note (4)
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Emissions
The 745 meets Tier 4 Final and Stage V emission standards.
No Engine De-rating Required Below
Peak Engine Torque Gross (SAE J1995)
Peak Engine Torque Net (SAE J1349)
Peak Engine Torque Speed
Weights
Rated Payload
Body Capacities
Heaped (SAE 2:1)
Struck
Tailgate Heaped SAE 2:1
Tailgate Struck
Transmission
Forward - 1
Forward - 2
Forward - 3
Forward - 4
Forward - 5
Forward - 6
Forward - 7
Forward - 8
Forward - 9
Reverse - 1
Reverse - 2
Sound Levels
Interior Cab
Note (1)
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
Note (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Operating Weights
Front Axle - Empty
Center Axle - Empty
Rear Axle - Empty
Total - Empty
Front Axle - Rated Load
Center Axle - Rated Load
Rear Axle - Rated Load
Total - Rated Load
Front Axle - Loaded
Center Axle - Loaded
Rear Axle - Loaded
Total - Loaded
Body Plate
Type
High Strength Brinell HB450 Wear Resistant Steel
Front
Chute
Side
Base
Body Hoist
Raise (manual)
Raise (automatic)
Lower (manual)
Lower (automatic)
Service Refill Capacities
Fuel Tank
DEF Tank
Cooling System
Brake Cooling Tank
Steering/Hoist Hydraulic System
Engine Crankcase
Transmission - OTG
Final Drive - Each
Axles - Each
Standards
Brakes
Cab - FOPS
Cab - ROPS
Steering
Turning Circle
Turning Dimensions - Steer Angle - Left/Right
Turning Dimensions - SAE Turning Radius
Turning Dimensions - Clearance Radius
Turning Dimensions - Inside Radius
Turning Dimensions - Aisle Width
Note
Dimensions are for machines equipped with 29.5R25 tires.
Steering
Lock to Lock
Optimal Loader/Truck Pass Matching
Hydraulic Excavator: 390 - Passes
Hydraulic Excavator: 374 - Passes
Wheel Loader: 982 - Passes
Wheel Loader: 980 - Passes
Wheel Loader: 972 - Passes
Note
An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.