Engine
Engine Model
Bore
Stroke
Displacement
Peak Engine Torque Gross (SAE J1995)
Gross Power - SAE J1995:2014
Net Power - ISO 14396
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV
No Engine De-rating Below
Peak Engine Torque Net (SAE J1349)
Net Power - SAE J1349:2011
Peak Engine Torque Speed
Weights
Rated Payload
Body Capacities
Heaped (SAE 2:1)
Struck
Tailgate Heaped SAE 2:1
Tailgate Struck
Transmission
Forward - 1
Forward - 2
Forward - 3
Forward - 4
Forward - 5
Forward - 6
Reverse - 1
Sound Levels
Interior Cab
Operating Weights
Total - Loaded
Rear Axle - Rated Load
Total - Empty
Total - Rated Load
Center Axle - Loaded
Front Axle - Rated Load
Center Axle - Rated Load
Center Axle - Empty
Rear Axle - Loaded
Front Axle - Loaded
Rear Axle - Empty
Front Axle - Empty
Body Plate Thickness
Side Plates
Front Plate
Base Plate
Service Refill Capacities
Fuel Tank
Cooling System
Hydraulic System
Engine Crankcase
Transmission
Final Drives/Differential
Output Transfer Gear Box
DEF Tank
Body Hoist
Raise Time
Lower Time
Steering
Lock to Lock
Standards
Brakes
Cab - FOPS
Cab - ROPS
Steering
Body Plate
Type
High strength Brinell HB450 wear resistant steel
Turning Circle
Turning Dimensions - Inside Radius
Turning Dimensions - Aisle Width
Turning Dimensions - SAE Turning Radius
Turning Dimensions - Clearance Radius
Turning Dimensions - Steer Angle - Left/Right
Note
Dimensions are for machines equipped with 23.5R25 tires.
Optimal Loader/Truck Pass Matching
Wheel Loader: 950M - Passes
Wheel Loader: 962M - Passes
Wheel Loaders: 966M/966M XE - Passes
Hydraulic Excavators: 336F/336F XE - Passes
Wheel Loaders: 972M/972M XE - Passes
Hydraulic Excavators: 349F/349F XE - Passes
Engine
Note (1)
The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
Emissions
The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
Note (3)
Net power when the fan is at maximum speed is 249 kW (334 hp) per the SAE reference conditions.
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Sound Levels
Note (1)
The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.
Note (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Engine
Note (4)
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Service Refill Capacities
Steering/Hoist Hydraulic System
Final Drive - Each