Engine
Gross Power - SAE J1995
Operating Specifications
Rated Operating Capacity
Weights
Operating Weight
Dimensions
Wheel Base
Height - Top of Cab
Vehicle Width over Tires
Ground Clearance
Departure Angle
Maximum Dump Angle
Bucket Pin Reach - Maximum Lift
Bucket Pin Height - Maximum Lift
Turning Radius from Center - Machine Rear
Reach - Maximum Lift/Dump
Bumper Overhang - Behind Rear Axle
Length - Without Bucket
Maximum Overall Height
Turning Radius from Center - Coupler
Maximum Reach - With Arms Parallel to Ground
Clearance at Maximum Lift and Dump
Length - With Bucket on Ground
Bucket Pin Height - Carry Position
Turning Radius from Center - Bucket (racked)
Rack Back Angle - Maximum Height
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA battery, 1883 mm (74 in) low profile bucket, no optional counterweights, Cat PC 12 × 16.5 tires and manual quick coupler (unless otherwise noted).
Hydraulic System
Hydraulic Flow - Standard - Loader Hydraulic Flow
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow
Hydraulic Flow - Standard - Loader Hydraulic Pressure
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure
Cab
ROPS
FOPS
Power Train
Travel Speed - Forward or Reverse - One Speed
Travel Speed - Forward or Reverse - Two Speed Option
Service Refill Capacities
Cooling System
Engine Crankcase
Fuel Tank
Hydraulic System
Hydraulic Tank
Chain Box - Each Side
Air Conditioning System (if equipped)
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Engine
Net Power - SAE 1349
Displacement
Stroke
Bore
Peak Torque - 1,500 rpm - SAE J1995
Engine Model
Net Power - ISO 9249
Net Flywheel Power
Operating Specifications
Tipping Load
Breakout Force - Tilt Cylinder
Breakout Force - Lift Cylinder
Rated Operating Capacity with Optional Counterweight
Dimensions
Roll Back Angle
Service Refill Capacities
Diesel Exhaust Fluid (DEF) Tank
Noise Level
Outside Cab**
Operating Specifications
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA battery, 1883 mm (74 in) low profile bucket, no optional counterweights, Cat PC 12 × 16.5 tires and manual quick coupler (unless otherwise noted).
Noise Level
Note (2)
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Weights
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA battery, 1883 mm (74 in) low profile bucket, no optional counterweights, Cat PC 12 × 16.5 tires and manual quick coupler (unless otherwise noted).
Noise Level
Inside Cab*
Note (3)
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.