Engine
Gross Power - SAE J1995
Operating Specifications
Rated Operating Capacity
Weights
Operating Weight
Dimensions
Wheel Base
Length - With Bucket on Ground
Length - Without Bucket
Height - Top of Cab
Vehicle Width over Tires
Maximum Overall Height
Bucket Pin Height - Maximum Lift
Bucket Pin Height - Carry Position
Reach - Maximum Lift/Dump
Clearance at Maximum Lift and Dump
Ground Clearance
Departure Angle
Maximum Dump Angle
Rack Back Angle - Maximum Height
Bumper Overhang - Behind Rear Axle
Turning Radius from Center - Bucket
Maximum Reach - With Arms Parallel to Ground
Turning Radius from Center - Machine Rear
Turning Radius from Center - Coupler
Note
* Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Hydraulic System
Hydraulic Flow - Standard - Loader Hydraulic Pressure
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
Hydraulic Flow - Standard - Loader Hydraulic Flow
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow
Cab
ROPS
FOPS
Power Train
Travel Speed - Forward or Reverse - One Speed
Travel Speed - Forward or Reverse - Two Speed Option
Service Refill Capacities
Chain Box - Each Side
Cooling System
Engine Crankcase
Fuel Tank
Hydraulic System
Hydraulic Tank
Air Conditioning System (if equipped)
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Engine
Net Power - SAE 1349
Displacement
Stroke
Bore
Engine Model
Weights
Note
* Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Engine
Peak Torque - 1,500 rpm - SAE J1995
Net Power - ISO 9249
Operating Specifications
Rated Operating Capacity with Optional Counterweight
Tipping Load
Breakout Force - Tilt Cylinder
Note
* Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Noise Level
Outside Cab***
Inside Cab**
Note (3)
***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.