Engine
Base Power (1st Gear) - Net
Engine Model
Bore
Stroke
Speed at Rated Power
Note (3)
Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Standard Capability
Note (2)
Optimized VHP Plus is standard for the 14M3.
Torque Rise
Maximum Altitude - Full Power
Maximum Torque - VHP Plus
Emissions
Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
Maximum Altitude - Full Power (Tier 3)
Maximum Altitude - Full Power (Tier 2)
Note (1)
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Standard - Fan Speed - Minimum
Note (4)
Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
Displacement
Number of Cylinders
Weights
Operating Weight - Typically Equipped
Moldboard
Blade Width
Frame
Circle - Outer Diameter
Front Axle - Wheel Lean - Left/Right
Front Axle - Total Oscillation per Side
Service Refill Capacities
Transmission and Differential
Diesel Exhaust Fluid Tank (Tier 4 Only)
Hydraulic System
Circle Drive
Cooling System
Fuel Tank
Moldboard
Arc Radius
Throat Clearance
Blade Width - With End Bits
Blade Height - With Cutting Edge
Blade Width - Without End Bits
Blade Height - Without Cutting Edge
Blade Range
Maximum Depth of Cut
Circle Centershift - Left
Maximum Lift Above Ground
Circle Centershift - Right
Blade Tip Range - Backward
Maximum Shoulder Reach Outside of Tires - Right
Moldboard Sideshift - Right
Moldboard Sideshift - Left
Maximum Shoulder Reach Outside of Tires - Left
Blade Tip Range - Forward
Weights
Gross Vehicle Weight - Base* - Total
Gross Vehicle Weight - Base* - Front Axle
Gross Vehicle Weight - Typically Equipped - Total
Gross Vehicle Weight - Typically Equipped - Rear Axle
Gross Vehicle Weight - Typically Equipped - Front Axle
Gross Vehicle Weight - Base* - Rear Axle
Engine
Note (5)
Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Weights
Note
*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).
Engine
Standard - Fan Speed - Maximum