Engine
Net Power - ISO 9249/SAE J1349
Weights
Operating Weight - Typically Equipped
Moldboard
Blade Width
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent of 2.288 metric tonnes (2.521 tons).
Blade Range
Maximum Depth of Cut
Engine
Standard Capability
Blade Range
Moldboard Side Shift Left
Service Refill Capacities
Engine Crankcase
Diesel Exhaust Fluid Tank (Tier 4 Only)
Dimensions
Length of Machine*
Engine
Number of Cylinders
Dimensions
Width All Wheel Drive (AWD)
Blade Range
Circle Center Shift Left
Blade Tip Range Backward
Dimensions
Width
Machine Weight
Joystick All-Wheel Drive (AWD) Weight* Tier 4
Service Refill Capacities
Hydraulic System
Dimensions
Note
*Typically equipped with push block and ripper.
Blade Range
Maximum Lift Above Ground
Engine
Derating Altitude (AWD)
Moldboard
End Bit
Engine
Torque Rise - ISO 9294
Moldboard
Cutting Edge
Blade Range
Circle Center Shift Right
Engine
Note (2)
Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Displacement
Derating Altitude
Maximum Torque - ISO 9249
Service Refill Capacities
Fuel Tank
Engine
Net Power Range (Tier 3)
Note (3)
Power as declared per ISO 14396
Machine Weight
Lever/Steering Wheel Weight* Tier 4
Moldboard
Blade Height
Engine
Bore
Service Refill Capacities
Transmission and Differential
Moldboard
Throat Clearance
Dimensions
Maximum Height
Machine Weight
Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4
Note (1)
*Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids.
Engine
Engine RPM
Service Refill Capacities
Circle Drive
Engine
Maximum Torque - AWD On
Note (1)
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture."
Engine Model
Blade Range
Blade Tip Range Forward
Service Refill Capacities
Cooling System
Engine
Stroke
Blade Range
Maximum Shoulder Reach Right
Engine
Emissions
U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA
Blade Range
Moldboard Side Shift Right
Machine Weight
Joystick Weight* Tier 4
Blade Range
Maximum Shoulder Reach Left
Dimensions
Basic Blade Width
Moldboard
Arc Radius
Engine
All-Wheel Drive Net Power Range (Tier 4)