236D3 Skid Steer Loader

360 View Video

Product Description

The Cat® 236D3 Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.

Specifications
Us
Metric
Engine
Gross Power - SAE J1995
74.3 hp
55.4 kW
Operating Specifications
Rated Operating Capacity
1800 lb
820 kg
Weights
Operating Weight
6567 lb
2979 kg
Dimensions
Wheel Base
43.5 in
1105 mm
Height - Top of Cab
82 in
2082 mm
Vehicle Width over Tires
66 in
1676 mm
Ground Clearance
7.7 in
195 mm
Departure Angle
26°
Maximum Dump Angle
48°
Maximum Reach - With Arms Parallel to Ground
53.3 in
1353 mm
Turning Radius from Center - Machine Rear
64.5 in
1639 mm
Bucket Pin Height - Maximum Lift
122.9 in
3122 mm
Length - Without Bucket
108.9 in
2767 mm
Rack Back Angle - Maximum Height
91°
Turning Radius from Center - Bucket
83 in
2107 mm
Turning Radius from Center - Coupler
51.8 in
1314 mm
Clearance at Maximum Lift and Dump
92.9 in
2359 mm
Reach - Maximum Lift/Dump
16 in
408 mm
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Bumper Overhang - Behind Rear Axle
40.2 in
1021 mm
Maximum Overall Height
156.6 in
3977 mm
Length - With Bucket on Ground
137.3 in
3487 mm
Bucket Pin Height - Carry Position
7.5 in
190 mm
Hydraulic System
Hydraulic Flow - Standard - Loader Hydraulic Flow
20 gal/min
76 l/min
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure
3335 psi
23000 kPa
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
39 hp
29 kW
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3335 psi
23000 kPa
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow
30 gal/min
112 l/min
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
58 hp
43 kW
Cab
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I
Power Train
Travel Speed - Forward or Reverse - Two Speed Option
10.6 mile/h
17.1 km/h
Travel Speed - Forward or Reverse - One Speed
7 mile/h
11.2 km/h
Service Refill Capacities
Chain Box - Each Side
2.3 gal (US)
8.8 l
Cooling System
3.7 gal (US)
14 l
Engine Crankcase
3 gal (US)
11 l
Fuel Tank
24.8 gal (US)
94 l
Hydraulic System
13.2 gal (US)
50 l
Hydraulic Tank
10.3 gal (US)
39 l
Engine
Net Power - SAE 1349
73.2 hp
54.6 kW
Displacement
203 in³
3.3 l
Stroke
4.7 in
120 mm
Bore
3.7 in
94 mm
Net Flywheel Power
73.2 hp
54.6 kW
Engine Model
Cat C2.2
Peak Torque - 1,500 rpm - SAE J1995
195 ft·lbf
265 N·m
Net Power - ISO 9249
73.9 hp
55.1 kW
Operating Specifications
Tipping Load
3600 lb
1635 kg
Breakout Force - Tilt Cylinder
5003 lb
2269 kg
Rated Operating Capacity with Optional Counterweight
2000 lb
910 kg
Noise Level
Outside Cab**
101 dB(A)
Note (2)
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Weights
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Noise Level
Note (3)
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Inside Cab*
83 dB(A)
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Operating Specifications
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Air Conditioning System (if equipped)
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Standard/Optional

Standard Equipment

ELECTRICAL
OPERATOR ENVIRONMENT
POWER TRAIN
OTHER
MANDATORY EQUIPMENT

Optional Equipment

OPTIONAL EQUIPMENT

Your time is valuable, and your business, much appreciated. Thanks for visiting our website. You can count on us for realistic answers to your equipment needs, state-of-the-art technology, experienced application specialists, flexible acquisition options and customized financing. We look forward to answering your questions.

Connect With Us!