Engine
Engine Power (ISO 14396)
Bore
Derating Altitude
Displacement
Emissions
U.S. EPA Tier 4 Final/EU Stage V
Engine Model
Engine RPM
Standard Capability
High - Ambient Capability
Maximum Torque - ISO 9249
Stroke
Torque Rise - ISO 9294
Number of Cylinders
Note (1)
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture.
Note (2)
Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Note (3)
Power as declared per ISO 14396
Engine Power AWD (ISO 14396)
Weights
Operating Weight - Typically Equipped
Air Conditioning System
Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.
Weight
Weight (Stage V)*
Moldboard
Blade Width
Weights
Note
* Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment.
Weight
Weight (Tier 4 Final)**
All-wheel Drive Weight (AWD) (Tier 4 Final)**
All-Wheel Drive Weight (AWD) (Stage V)*
Dimensions
Width All Wheel Drive (AWD)
Length of Machine*
Maximum Height
Width
Note
*Typically equipped with push block and ripper.
Moldboard
Arc Radius
Blade Height
Cutting Edge Width
End Bit
Throat Clearance
Blade Range
Circle Center Shift Left
Circle Center Shift Right
Maximum Depth of Cut
Maximum Lift Above Ground
Maximum Shoulder Reach Left
Maximum Shoulder Reach Right
Moldboard Side Shift Left
Moldboard Side Shift Right
Blade Tip Range Backward
Blade Tip Range Forward
Service Refill Capacities
Fuel Tank
Circle Drive with Slip Clutch
Circle Drive without Slip Clutch
Cooling System
Engine Crankcase
Diesel Exhaust Fluid Tank (Tier 4 Only)
Hydraulic System
Transmission