Engine
Engine Model
Gross Power
Weights
Operating Weight
Engine
Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995
Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995
Emissions (Tier 2 Equivalent): Net Power ISO - 9249
Rated Speed
Bore
Stroke
Displacement
Peak Torque - 1,200 rpm
Torque Rise
Note (1)
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
Note (2)
Net torque rise meets SAE J139.
Note (3)
No engine derating required up to 3050 m (10,000 ft) altitude.
Transmission
Transmission Type
Cat Planetary Power Shift
Converter Drive - Forward 1
Converter Drive - Forward 2
Converter Drive - Forward 3
Converter Drive - Reverse 1
Converter Drive - Reverse 2
Converter Drive - Reverse 3
Direct Drive - Forward 1
Direct Drive - Forward 2
Direct Drive - Forward 3
Direct Drive - Reverse 1
Direct Drive - Reverse 2
Direct Drive - Reverse 3
Note
Travel speeds based on 45/65-45 L-5 46 ply tires.
Hydraulic System - Lift/Tilt
Output at 1,850 rpm and 6900 kPa (1,000 psi)
Cylinders, Double Acting - Lift, Bore and Stroke
177 mm × 1760 mm (0.58 ft × 5.8 ft)
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke
267 mm × 286 mm (0.88 ft × 0.94 ft)
Service Refill Capacities
Fuel Tank - Standard
Cooling System
Crankcase
Transmission
Differential - Final Drives - Front
Differential - Final Drives - Rear
Hydraulic System - Steering and Engine Cooling Fan - Tank Only
Axles
Front
Brakes
Brakes
Blades
Blade Capacities
30.5 to 44.8 m3 (40 to 58.6 yd3)
Dimensions (Approximate)
Height - Top of ROPS
Height - Top of Exhaust Pipe
Height - Top of Hood
Ground Clearance
Centerline of Front Axle to Hitch
Centerline of Rear Axle to Edge of Bumper
Wheel Base
Length - With Blade on Ground
Hydraulic System - Steering
Steering System - Pump
Piston, variable displacement
Operating Specifications
Operating Weight
Hydraulic System - Steering
Minimum Turning Radius - Over Blade
Steering System - Circuit
Total Steering Angle
Axles
Rear
Sound Performance Levels
Sound Performance
• The machine sound power level was measured according to
ISO 6395:2008. The measurement was conducted at 70 percent
of the maximum engine cooling fan speed.
• The operator sound pressure level was measured according to
ISO 6396:2008. The measurement was conducted at 70 percent
of the maximum engine cooling fan speed.
• Hearing protection may be needed when the machine is operated
with a cab that is not properly maintained or when the doors or
windows are open for extended periods or in a noisy environment.
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated
greenhouse gas refrigerant R134a (Global Warming Potential = 1430).
The system contains 1.8 kg of refrigerant which has a CO2 equivalent
of 2.574 metric tonnes.
Cab
ROPS/FOPS
ISO 3471:2008 and ISO 3449:2005 Level II Standards
Service Refill Capacities
Note (1)
- All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfer or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214. Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. For further fluid specifications and guidelines, visit: http://parts.cat.com/cda/files/3244668/7/SEBU6250-19.pdf
Hydraulic System - Steering
Relief Valve Setting
Standard Equipment
ELECTRICAL AND LIGHTING
POWERTRAIN
OPERATOR ENVIRONMENT
SAFETY
SERVICE
COOLING
COLD WEATHER
EFFICIENCY
TRAMMING
Optional Equipment
ELECTRICAL AND LIGHTING
POWERTRAIN
OPERATOR ENVIRONMENT
SAFETY
SERVICE
BLADES
COOLING
COLD WEATHER
MACHINE CONTROL AND GUIDANCE
TIRES AND RIMS
TRAMMING
SOUND SUPPRESSION